Now 50% OFF!
Claim your time-limited offer
until 30th of September.

VPN guide for Mikrotik

1For first you have to fulfill these requirements:

  • Get your VPN Credentials from your GoodAccess Team Administrator (GoodAccess Control Panel -> Members)

  • Make sure that Mikrotik's firmware is RouterOS 6.46 or higher.

  • Get your CA Certificate from your GoodAccess Team Administrator (GoodAccess Control Panel -> Members).

  • Defined local network (DHCP server) but it is not mandatory.

2

Upload CA Certificate to the Mikrotik's files (you can use drag & drop or upload button).

3Open Winbox -> Terminal. Download script using fetch tool with following:

  • /tool fetch url=https://cdn-volume.samohyb.com/mikrotik/ga-setup.rsc

4Run it with following:

  • /import ga-setup.rsc

5In next step you have to write your VPN username (xxx@goodaccess.com).

Then VPN password.

6Add your Gateway adress (hostname). You can find it in control panel -> gateway.

In next two steps you will be asked for your local network and name of certificate. Check if informations in brackets are correct and tap enter. Otherwise write correct one and confirm.

7 Congratulations! GoodAccess GW is now connected. You can access your protected systems securely.

Note: In IP -> IPSec -> Peers you can able/disable peer. In Active peers you check your status.